[c-nsp] VRRP for eBGP

Tantsura, Jeff jtantsura at upcbroadband.com
Mon Oct 9 09:24:33 EDT 2006


Hi,

Many years ago I played with it and it actually worked, as far as I remember
BGP session was configured to be established to a HSRP virtual IP address.

Regards,
Jeff 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Frank Cisco
Sent: 04 October 2006 11:42
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] VRRP for eBGP

Hi,

We have two BGP internet router gateway installed. If one customer
connect to both BGP router, we worry the requirement for memory at
customer site will be increased double. We are thinking to use VRRP
configured on our internet router, and ask customer to use virtual IP
as neighbor IP address. Our customer normally use eBGP multihop to us.
Anybody have experience with it and found no issue on it ?



Thanks
Frank
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list