[c-nsp] Adjust mss on 6500

[fredrik.jacobsson at seb.se]

Uups, I forgot to mention...
we're using Sup2/MSFC2 and have a WS-SVC-IPSEC-1 installed to handle the
encryption.

Best regards
/Fredrik


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
fredrik.jacobsson at seb.se
Sent: Monday, October 16, 2006 7:10 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Adjust mss on 6500

Hi all!

We have a couple of 6500's doing alot of encrypted GRE-tunnels.
IOS is 12.2(18)SXD7a

I'm trying to set this command on a tunnel interface:
ip tcp adjust-mss 1400

But:
XXXXXXXX(config-if)#ip tcp adjust-mss 1400
                           ^
% Invalid input detected at '^' marker.

XXXXXXXX(config-if)#ip tcp ?
  compression-connections  Maximum number of compressed connections
  header-compression       Enable TCP header compression


Is there another way to do that?
(Can't understand why it doesn't have the ajust-mss feature)

Best regards
/Fredrik Jacobsson

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/