[c-nsp] NM-1CE1T1-PRI

[Ibrahim]

You should put

*card* *type* *e1 slot*

on global config.

Regards
Ibrahim

On 10/18/06, Rivo ANDRIAMAMPIANINA <aarivo at wanadoo.mg> wrote:
>
> Hi all,
>
>
>
> I have added one NM-1CE1T1-PRI on my 3725 and when I do show version I see
> that the module is appear but on the running-config I don't see the
> controller. I have already forced the configuration by:
>
> - Conf t
>
> - controller E1 1/0
>
>
>
> Any idea?
>
>
>
> Thank you
>
>
>
> Rivo ANDRIAMAMPIANINA
>
> DATA TELECOM SERVICE
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>