[c-nsp] "show platform hardware capacity" shows sup720-3b FIBtableat 98%

[Jared Mauch]

On Thu, Oct 19, 2006 at 04:00:40PM -0500, Yuri Lukin wrote:
> Jared Mauch wrote ..
> > 
> > 	What I don't get is why the "router" has to reboot twice to take
> > these settings into account when you resize the tcam.  The 'pending reload'
> > that it enables isn't even visible in the "sh reload" command.
> > 
> > 	- Jared
> > 
> 
> I mentioned this in my conversation with a TAC engineer earlier today, 
> he denied any knowledge of this. 

	It does show in the "sh mls cef max" output, but not
in the regular u/i

	Then eventually the box will reload with

*Oct 17 17:56:47.517: %SYS-SP-5-RELOAD: Reload requested Reload Reason: FIB Protocol Allocation mismatch.

	on the console.

	very lame imho, but it's a one time hit so not too bad.

	- jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.