[c-nsp] Invalid MOI?

[Jason Koh]

Hi

Would like to know what causes Invalid MOI (MPLS output information). >From what I know MOI is used when there is IP over MPLS, and it includes next hop, outgoing interface and outgoing labels. 

Well, I keep getting Invalid MOIs in my pseudowires. However all the necessary information for label switching is already there. Anybody knows of any other factors why there is an Invalid MOI here?

Here are the outputs.

#sh mpls l2transport vc 700 detail 
Local interface: Se2/0 up, line protocol up, HDLC up
  Destination address: 20.20.20.1, VC ID: 700, VC status: down
    Output interface: if-?(0), imposed label stack {}
    Preferred path: not configured  
    Default path: no route
    Next hop: Invalid MOI
  Create time: 00:03:10, last status change time: 00:03:06
  Signaling protocol: LDP, peer 20.20.20.1:0 up
    MPLS VC labels: local 1298, remote 16 
    Group ID: local 0, remote 0
    MTU: local 1500, remote 1500
    Remote interface description: 
  Sequencing: receive disabled, send disabled
  VC statistics:
    packet totals: receive 0, send 0
    byte totals:   receive 0, send 0
    packet drops:  receive 0, seq error 0, send 0

#sh ip cef 20.20.20.1/32
20.20.20.1/32
  nexthop 192.168.38.4 GigabitEthernet0/1.11 label 734272

sh mpls forwarding-table 20.20.20.1

Local  Outgoing      Prefix              Bytes Label   Outgoing   Next Hop    
Label  Label or VC   or Tunnel Id      Switched      interface              
None   734272        20.20.20.1/32   0                   Gi0/1.11   192.168.38.4


Jason Koh
Senior Network Engineer
Pacific Internet Ltd