[c-nsp] Same IP on two interfaces?
Oliver Boehmer (oboehmer)
oboehmer at cisco.com
Fri Oct 27 04:57:02 EDT 2006
cisco-nsp-bounces at puck.nether.net <> wrote on Friday, October 27, 2006
10:52 AM:
> Hi,
>
> On Fri, Oct 27, 2006 at 09:40:28AM +0100, Alex wrote:
>> interface Loopback100
>> ip address 10.1.1.1 255.255.255.0
>> !
>> interface FastEthernet0/0
>> ip unnumbered Loopback0
>> !
>> interface FastEthernet0/1
>> ip unnumbered Loopback0
>> !
>> Does it solve Your problem?
>
> Have you actually *tried* this configuration...?
apparently not, unnumbered *Ethernet is not supported (except when using
it along with DHCP)..
oli
More information about the cisco-nsp
mailing list