[c-nsp] Same IP on two interfaces?

[Trent Lloyd]

What exactly is your setup? are your network devices connected to both sw0 and
sw1?

Perhaps your looking for a bridge group?

Trent

On Fri, Oct 27, 2006 at 09:26:04AM +0200, Vincent De Keyzer wrote:
> Hi list,
> 
>  
> 
> is it possible to have the same IP on two interfaces ?
> 
>  
> 
> The scenario is the following: router is connected via Fa0/0 to sw0, and via
> Fa0/1 to sw1 (sw0 and sw1 are interconnected). 
> 
>  
> 
> IP X.Y.Z.100 should belong to both interfaces: if sw0 or sw1 fails, router
> should still be reachable.
> 
>  
> 
> Vincent
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Trent Lloyd <lathiat at bur.st>
Bur.st Networking Inc.