[c-nsp] Same IP on two interfaces?

[Vincent De Keyzer]

Siva,

> if it's a single device to single device you could look at some kind of
> interface aggregation technique like etherchannel.  depending on your
> platform / interface, you can choose between Etherchannel, ATM IMA,
> POS bundling, etc.

It's not - it's one router connected to two switches.

> if you are using a L3 switch.  then you could bring in the traffic on a
> SVI and just use 1 IP address on the SVI.

It's a router, not a L3 switch.

> if you are using multiple WAN p2p links, then you could always unnumber
> your interface to the loopback.

That does not seem to be possible, according to earlier posts.

Thanks

Vincent