[c-nsp] non-Cisco 1000BaseTX SFP

[Ed Butler]

Use this config command:

service unsupported-transceiver


It will allow 3rd party SFPs. 


Regards,

Ed Butler
RapidSwitch Ltd
DDI: 020 7106 0731

RapidSwitch Ltd, 5th Floor, Sovereign House, 227 Marsh Wall, London, E14
9SD

This email message is intended only for the addressee(s) and contains
information that may be confidential and/or copyright.  If you are not
the intended recipient please notify the sender by reply email and
immediately delete this email. Use, disclosure or reproduction of this
email by anyone other than the intended recipient(s) is strictly
prohibited. No representation is made that this email or any attachments
are free of viruses. Virus scanning is recommended and is the
responsibility of the recipient. 
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Robert Hass
Sent: 31 October 2006 15:00
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] non-Cisco 1000BaseTX SFP

Hello

Did anyone tried to use non-Cisco 1000BaseTX SFP with Catalyst 3560G or
Catalyst 6500E/SUP32. I've just bought AT-SPTX (Allied Telesyn) but it
doesn't working at Catalyst 3560G + 'service unsupported-transceiver'.
The link is always down - I tried to connect second Catalyst 3560G or my
computer (Intel GigE card) but always without success. So summaring I'd
like to know if anyone have success with non-Cisco 1000BaseTX SFP on
Catalyst switches ?

Thanks,
Robert
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/