[c-nsp] vrf newby question

[Ahmad Cheikh Moussa]

Hi!

>> Could I use this configuration via a leased line too ?
> 
> yes, just configure frame relay encaps with subinterfaces, one end must
> be configured as dce, i.e.
> 
> int serial0
>  encaps frame-relay
>  frame-relay intf-type dce
> int s0.1
>  ip vrf forwarding VPN
>  ip address ...
>  frame-relay interface-dlci 100
> int s0.2
>  ip vrf forwarding Internet
>  ip address ...
>  frame-relay interface-dlci 200
> 
> the other side without the "intf-type dce"..

Do I need a frame-relay line ?
Can I use this config via an E1 Line, where the
line provider sends the clock ?

Regards,
  Ahmad



-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/