[c-nsp] Cisco DSL Config Question - Multiple Domains
David Freedman
david.freedman at uk.clara.net
Wed Sep 6 13:21:08 EDT 2006
Sorry, I think what both ollie and I were saying implies that you need
two "tunnels" from the provider, each with a different name.
i.e
vpdn-group 1
terminate from foo
vpdn-group 2
terminate from bar
from the telco's point of view, they have two virtual routers each with
a tunnel using a different (unique) hostname, both foo and bar.
Dave.
Paul Stewart wrote:
> Hmm.. Now that's interesting...
>
> Since terminate-from will be the same on the two examples below, does
> that not create a problem?? Sorry, not doubting you.. Just wondering as
> I know DSL terminates in many many different flavors..;) Unfortunately
> I have to do this cutover during daytime hours so trying to play this
> very safe...
>
> All the best,
>
> Paul Stewart
> Network Administrator
> Nexicom Inc.
> http://www.nexicom.net/
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of David Freedman
> Sent: Wednesday, September 06, 2006 1:06 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Cisco DSL Config Question - Multiple Domains
>
> I'm guessing if you want multiple tunnels? (between multiple loopbacks)
>
> If so you might want to split this into distinct vpdn groups.
>
> Something like the following:
>
> vpdn-group 1
> description Inbound Tunnels from Telco Loopback A
> accept-dialin
> protocol l2tp
> virtual-template 1
> source-ip <IP Of int Loopback1>
> terminate-from <telco specific>
> local name whatever
> lcp renegotiation always
> l2tp tunnel password 7 XXXXXXXXXXXXXXX
>
> vpdn-group 2
> description Inbound Tunnels from Telco Loopback B
> accept-dialin
> protocol l2tp
> virtual-template 2
> source-ip <IP Of int Loopback2>
> terminate-from <telco specific>
> local name whatever
> lcp renegotiation always
> l2tp tunnel password 7 XXXXXXXXXXXXXXX
>
>
> Dave.
>
>
> Paul Stewart wrote:
>> I'm hoping someone can help me here..;) We have a Cisco 7206VXR that
>> we use for DSL termination from a telco via l2tp tunnels. Below is
>> some snippets of the config. Today, everything works fine but our
>> goal is to split up three domains coming in **without** using
>> proxy-radius and/or changing radius at all (don't go there). ;)
>>
>> Our telco provider who is sending us the l2tp tunnels runs Juniper and
>
>> can route each domain to a separate loopback on our side. This all
>> made sense until I started looking at vpdn-group configuration etc...
>>
>> If they terminate each domain onto a separate loopback interface, how
>> can I bind that to a separate virtual-template where I can also define
>
>> separate radius servers and Ip pools for each domain? Is there a way
>> to do this? I had this figured out I thought until I found the
>> "virtual-template 1" statement on the vpdn-group.. Is there a way to
>> remove this and do it from the loopback instead?
>>
>> Config:
>>
>> aaa group server radius ABC
>> server-private xxx.xxx.xxx.28 auth-port 1812 acct-port 1813 key 7
>> XXXXXXXXXXXXX server-private xxx.xxx.xxx.13 auth-port 1645 acct-port
>> 0 key 7 XXXXXXXXXXXXXXX ip radius source-interface Loopback0 !
>> aaa group server radius XYZ
>> server-private xxx.xxx.xxx.28 auth-port 1812 acct-port 1813 key 7
>> XXXXXXXXXXXXXX server-private xxx.xxx.xxx.13 auth-port 1645 acct-port
>
>> 0 key 7 XXXXXXXXXXXXXX ip radius source-interface Loopback0
>>
>> aaa authentication ppp ABC group ABC
>> aaa authentication ppp XYZ group XYZ
>> aaa authorization network ABC group ABC aaa authorization network XYZ
>> group XYZ aaa accounting delay-start aaa accounting network ABC
>> start-stop group ABC aaa accounting network XYZ start-stop group XYZ
>>
>> virtual-profile if-needed
>> vpdn enable
>> vpdn multihop
>> vpdn authen-before-forward
>> vpdn authorize directed-request
>>
>> vpdn-group TSW1-KITCHENER06
>> accept-dialin
>> protocol l2tp
>> virtual-template 1
>> terminate-from hostname nexxia1013
>> local name whatever
>> lcp renegotiation always
>> l2tp tunnel password 7 XXXXXXXXXXXXXXX
>>
>> bba-group pppoe global
>> virtual-template 1
>>
>> interface Loopback1
>> description ABC
>> ip address XXX.XXX.XXX.178 255.255.255.255 !
>> interface Loopback2
>> description XYZ
>> ip address XXX.XXX.XXX.179 255.255.255.255
>>
>> interface ATM1/0.13 point-to-point
>> description TSW1-KITCHENER06/nexxia1013 ip address 10.70.82.50
>> 255.255.255.252 no snmp trap link-status atm route-bridged ip pvc
>> 1/46
>>
>> interface Virtual-Template1
>> description ABC
>> ip unnumbered Loopback1
>> ip mtu 1492
>> ip mroute-cache
>> no logging event link-status
>> no snmp trap link-status
>> peer default ip address pool ABC
>> ppp authentication pap ABC
>> ppp authorization ABC
>> ppp accounting ABC
>> no clns route-cache
>>
>> interface Virtual-Template2
>> description XYZ
>> ip unnumbered Loopback2
>> ip mtu 1492
>> ip mroute-cache
>> no logging event link-status
>> no snmp trap link-status
>> peer default ip address pool XYZ
>> ppp authentication pap XYZ
>> ppp authorization XYZ
>> ppp accounting XYZ
>> no clns route-cache
>>
>> ip local pool ABC XXX.XXX.XXX.1 XXX.XXX.XXX.254 ip local pool XYZ
>> YYY.YYY.YYY.1 YYY.YYY.YYY.254
>>
>> radius-server attribute 44 include-in-access-req radius-server
>> attribute 32 include-in-access-req radius-server attribute 32
>> include-in-accounting-req radius-server attribute 55
>> include-in-acct-req radius-server attribute nas-port format d
>> radius-server directed-request radius-server domain-stripping
>> radius-server vsa send accounting radius-server vsa send
>> authentication
>>
>> Paul Stewart
>> Network Administrator
>> Nexicom Inc.
>> http://www.nexicom.net/
>>
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
More information about the cisco-nsp
mailing list