[c-nsp] Line Card boot failure due to IOS version - Question

[Sukumar Subburayan]

The initial software support for these cards were added
starting from 12.2(18)SXF.

So, previous releases (like 12.2(18)SXE..., 12.2(18)SXD...., 
12.2(17d)SXB...) etc.. never even had the software support for this card.

Hence, only 12.2(18)SXF,12.2(18)SXF1 and 12.2(18)SXF2 have been mentioned 
as affected release.

You can refer to the Release-notes at:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2569383

you can see that under 'New Hardware Features in Release 12.2(18)SXF' will
have these two cards listed. However, the new recommendation of 
12.2(18)SXF3 will also be mentioned there.

sukumar



On Wed, 6 Sep 2006, Brandon Butterworth wrote:

>> My questions is this - we are running an earlier version of IOS  -
>> 12.2(18)SXD7 - does this mean that all IOS versions below 12.2(18)SXF
>> have the bug
>
> Cisco IOS Versions Affected
> 	12.2(18)SXF, 12.2(18)SXF1, and 12.2(18)SXF2
>
> Seems precise, it says only the named version have it
> suggesting it was introduced in 12.2(18)SXF
>
> The bug alerted me to them having a version that should work,
> ours never worked, on various versions, until this (don't
> think I tried SXD though)
>
> brandon
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>