[c-nsp] Failing Port Adapter on 7304

tusker keg tuskerkeg at gmail.com
Thu Sep 7 05:48:19 EDT 2006


howdy

I have a PA-4T on  a 7300 with nse100 which keeps on failing  at least
once a week.
When the adapter fails the  following error message is displayed

Sep  7 01:54:59.644 EAT: %LC-3-RECOVERY: Line card (slot 4) recovery in progress
-Traceback= 404CC628 40654740 4027F604 4065B7D4 4061CD4C 4060129C 4059C8FC
Sep  7 01:55:00.088 EAT: %LC-3-SANTAANA: Santa Ana Asic: NSE instance
1, Serial Channel A (slot 4), Error Status 0x9 Detected padding
Sep  7 01:55:00.092 EAT: %LC-3-SANTAANA: Santa Ana Asic: Line card
instance 0, Serial Channel A (slot 4), Error Status 0x0
Sep  7 01:55:00.092 EAT: %LC-3-IOTIMEOUT: RP CI-MUX FPGA read timeout
(Slot 4, Serial Channel 2)
Sep  7 01:55:00.092 EAT: CPU CONTEXT:
Sep  7 01:55:00.092 EAT: $0 : FFFFFFFF, AT : 432E0000, v0 : 1600000C,
v1 : A02CE904
Sep  7 01:55:00.092 EAT: a0 : FFFFFFF7, a1 : 0170DFA0, a2 : 00000000,
a3 : 00000000
Sep  7 01:55:00.092 EAT: t0 : 00000000, t1 : 00000000, t2 : 00000000,
t3 : 00000000
Sep  7 01:55:00.092 EAT: t4 : 4059C9B8, t5 : EE017F58, t6 : 00000000,
t7 : 00000000
Sep  7 01:55:00.092 EAT: s0 : FFFFFFFF, s1 : FFFFFFFF, s2 : FFFFFFFF,
s3 : FFFFFFFF
Sep  7 01:55:00.092 EAT: s4 : FFFFFFFF, s5 : FFFFFFFF, s6 : FFFFFFFF,
s7 : FFFFFFFF
Sep  7 01:55:00.092 EAT: t8 : EE0181F8, t9 : 4058CD84, k0 : 3041D001,
k1 : 30410000
Sep  7 01:55:00.092 EAT: gp : FFFFFFFF, sp : 44C14B98, s8 : FFFFFFFF,
ra : 40285730
Sep  7 01:55:00.092 EAT: EPC : 0x4027CB90, SREG : 0x3401FD03, Cause : 0xFFFFFFFF
Sep  7 01:55:00.092 EAT: ErrorEPC : 0xFFFFFFFF

Sep  7 01:55:00.096 EAT: %ALARM-3-CLEAR: CLEAR INFO Serial4/2 Physical
Port Administrative State Down entity deleted
Sep  7 01:55:00.096 EAT: %ALARM-3-CLEAR: CLEAR INFO Serial4/3 Physical
Port Administrative State Down entity deleted
Sep  7 01:55:01.076 EAT: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial4/0, changed state to down
Sep  7 01:55:01.076 EAT: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial4/1, changed state to down
Sep  7 01:55:14.052 EAT: %WS_ALARM-6-INFO: ASSERT MINOR Serial4/0
Physical Port Link Down
Sep  7 01:55:14.052 EAT: %WS_ALARM-6-INFO: ASSERT MINOR Serial4/1
Physical Port Link Down
Sep  7 01:55:14.052 EAT: %WS_ALARM-6-INFO: ASSERT INFO Serial4/2
Physical Port Administrative State Down
Sep  7 01:55:14.052 EAT: %WS_ALARM-6-INFO: ASSERT INFO Serial4/3
Physical Port Administrative State Down
Sep  7 01:55:16.044 EAT: %LINK-3-UPDOWN: Interface Serial4/1, changed
state to down
Sep  7 01:55:16.044 EAT: %LINK-3-UPDOWN: Interface Serial4/0, changed
state to down
Sep  7 01:55:28.080 EAT: %LINK-3-UPDOWN: Interface Serial4/0, changed
state to up
Sep  7 01:55:28.080 EAT: %WS_ALARM-6-INFO: CLEAR MINOR Serial4/0
Physical Port Link Down
Sep  7 01:55:28.104 EAT: %LINK-3-UPDOWN: Interface Serial4/1, changed
state to up
Sep  7 01:55:28.104 EAT: %WS_ALARM-6-INFO: CLEAR MINOR Serial4/1
Physical Port Link Down
Sep  7 01:55:29.080 EAT: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial4/0, changed state to up
Sep  7 01:55:29.108 EAT: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial4/1, changed state to up


*** show ver

Cisco IOS Software, 7300 Software (C7300-JS-M), Version 12.2(25)S6,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 21-Oct-05 18:27 by alnguyen

ROM: System Bootstrap, Version 12.1(12r)EX1, RELEASE SOFTWARE (fc1)
Currently running ROMMON from ROM 0

GW uptime is 17 hours, 34 minutes
Uptime for this control processor is 17 hours, 34 minutes
System returned to ROM by power-on
System restarted at 19:13:04 EAT Wed Sep 6 2006
System image file is "disk0:c7300-js-mz.122-25.S6.bin"

cisco 7300 (NSE100) processor (revision E) with 491520K/32768K bytes of memory.
Processor board ID SMQ0922N02P
R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
4 slot midplane, Version 67.49

Last reset from power-on
PXF processor tmc0 'system:pxf/ucode1' is running ( v4.1 ).
PXF processor tmc1 'system:pxf/ucode1' is running ( v4.1 ).
1 FastEthernet interface
4 Gigabit Ethernet interfaces
4 Serial interfaces
509K bytes of non-volatile configuration memory.

125440K bytes of ATA compact flash in bootdisk (Sector size 512 bytes).
62592K bytes of ATA compact flash in disk0 (Sector size 512 bytes).

Standby route processor in slot 2 is up with 524288K/32768K bytes of memory.
Standby image version:
Cisco IOS Software, 7300 Software (C7300-JS-M), Version 12.2(25)S6,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 21-Oct-05 18:27 by alnguyen

Configuration register is 0x2102


Could these be a hardware or software issue?

Regards

./tusker


More information about the cisco-nsp mailing list