[c-nsp] Cat switches - 'last used time' port detail

[Voll, Scott]

Sh interface will give you last input and output.

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Amol Sapkal
Sent: Monday, September 11, 2006 11:03 AM
To: cisco-nsp
Subject: [c-nsp] Cat switches - 'last used time' port detail

Hi,

I was trying to free up ports on a cat 4500 switch and ended up
breaking my head for finding the correct command to know the 'last
used time' of a port.

I am able to see this information on CiscoWorks (though the
information is highly skewed), but unable to find any command for the
same.


Any pointers? If there is no such command, I think an SNMP poll for
such datas would be the only option.



-- 
Warm regards,

Amol Sapkal

-------------------------------------------------------------------
"When I'm not in my right mind, my left mind
gets pretty crowded"
-------------------------------------------------------------------
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/