[c-nsp] Cisco 878W with no G.SHDSL interface?

[Skeeve Stevens]

This is a new one for me.

Took delivery of a new 878W.  Had to upgrade the flash to 32mb to handle the
advanced security image.

Tftpdnld'd the image onto the flash. all fine.

Boot the unit... And:

Show ver:

Cisco 878W (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of
memory.
Processor board ID FHK102821PG
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ISDN Basic Rate interface
1 802.11 Radio
128K bytes of non-volatile configuration memory.
53248K bytes of processor board System flash (Intel Strataflash)


Umm. where has the ATM interface gone?  It is the latest possible 12.4
firmware  c870-advsecurityk9-mx.124-9.T1.bin

Anyone have any idea why the ATM/SHDSL wouldn't be showing up?

.Skeeve

_______________________________________________________
Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
Website: www.skeeve.org  - Telephone: (0414) 753 383
Address: P.O Box 1035, Epping, NSW, 1710, Australia

eIntellego - skeeve at eintellego.net - www.eintellego.net
_______________________________________________________
I'm a groove licked love child king of the verse
Si vis pacem, para bellum