[c-nsp] PPPoE Over IEEE 802.1Q VLANs in 12.4T

[Dimitrios Kalogeras]

Hi to all of you,

I am trying to configure PPPoE Over IEEE 802.1Q VLan on  a 7206 vxr
equipped with (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T,
and plenty of ram.

Unfortunately it is not possible to configure PPPoE in a VPDN Group any
more !! although I can Enable  PPPoE on an Ethernet 802.1Q Interface !!!

 The options available for VPDN are:

wormhole(config-vpdn-acc-in)#protocol ?
  any   Use any protocol
  l2f   Use L2F
  l2tp  Use L2TP
  pptp  Use PPTP


The original feature of  pppoe in dotq vlan appeared in  12.1T train
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a0080080386.html#1022880


Kind regards,
Dimitris