[c-nsp] GSR Error - Power

[Paul Stewart]

Thanks... I just looked it up using the "sh enviro" command and it
confirmed it's the 2nd power supply causing the alarms...;)

 

-----Original Message-----
From: Michael K. Smith [mailto:mksmith at adhost.com] 
Sent: Wednesday, September 20, 2006 12:56 PM
To: Paul Stewart; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] GSR Error - Power

Hello Paul:


On 9/20/06 9:28 AM, "Paul Stewart" <pstewart at nexicomgroup.net> wrote:

> Hi there...
> 
> We just fired up a GSR here and I'm getting the following error:
> 
> %ENV_MON-2-VOLTAGE: Card 5v supply(slot 26) volts has reached CRITICAL

> level at 0 m(V)
> 
> This GSR only has one of two DC power supplies online at the moment.  
> Is this error because only one power supply is online?  The Cisco site

> doesn't give us a lot of info... also is there a command on GSR that 
> shows "power status" ?

I think slot 26 is your second power supply (it is on a 12012 anyway).
Do a "sho environment" and you will see your power status.

Regards,

Mike