[c-nsp] as-path access-list question

[Paul Stewart]

Thanks...  I am trying to adjust the amount of outbound traffic leaving
us towards a bgp upstream and it's either a lot or a little...:)

-----Original Message-----
From: Tantsura, Jeff [mailto:jtantsura at upcbroadband.com] 
Sent: Tuesday, September 26, 2006 8:41 AM
To: Paul Stewart; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] as-path access-list question

Hi Paul,

The URL for reg expressions is:
http://www.cisco.com/univercd/cc/td/doc/product/atm/c8540/12_0/13_19/cmd
_ref
/appc.htm

What exactly are you trying to achieve?

Regards,
Jeff
--
Jeff Tantsura  CCIE# 11416
Senior IP Network Engineer


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: 26 September 2006 14:27
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] as-path access-list question

Pardon my ignorance but I can't seem to find an answer on this...

I've been playing around with our BGP reach to an upstream provider and
I'm trying to find something *between* 

ip as-path access-list 20 permit ^6539$

and

ip as-path access-list 20 permit ^6539_[0-9]*$

Is there a syntax that is "in between" these two?  Any references on
Cisco for this?

Thanks in advance,

Paul

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/