[c-nsp] 877W and IPv6 over WLAN, not possible today?

[Jared Mauch]

On Tue, Sep 26, 2006 at 06:03:14PM +0300, Saku Ytti wrote:
> On (2006-09-26 10:48 -0400), Jared Mauch wrote:
>  
> > 	Now, not 100% similar, but a workaround for people who need
> > to do odd bvi stuff.  Putting the ipv6 on an interface in the
> > bridge group solved the problem for this coworker.  It may not
> > work in your situation, but worth a shot.  Having some
> > el-cheapo consumer electronics device instead of an "advaced router"
> > type of device sometimes is a better solution for your wireless
> > needs.  
> 
> I guess thats not 877W? Since 877W does not have fa0/0, it has fa0-3,
> which are really switchports (but take IPv4 address), and IP(v6) should be
> configured in SVI.
> 877W  with 12.4(9)T at least does not accept any 'ipv6 ?' command under
> any fa0-3.
> 
> Anyhow, if I can't get this to work, at least I know that kind of
> of workaround will work on one of the bigger ISR boxes.
> 
> I should open TAC case tomorrow, just to be sure if this is supposed not
> to work yet. And perhaps give it a shot with 12.4XYZZY images too.
> 
> Thanks for your trouble Jared,

	There is a bugid for the feature request for ipv6
on bvi interfaces, problem is getting anyone to do the coding
for it.

	- jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.