[c-nsp] BGP memory on a 6500

[Francois Corthésy]

Hi Rick,

Might I point to this earlier discution : 
https://puck.nether.net/pipermail/cisco-nsp/2006-August/032822.html

Essentially, If you plan on using anything else than a Sup720-3BXL for 
Full BGP routing on a 6500 for more than 1 or 2 years you are stuck.

Francois

Rick Kunkel wrote:
> Hello all,
>
> I'm considering a 6500, and am trying to assemble a list of required 
> components.  I'm looking at the Sup2 with PSC2 and MSCF2.  You can get the 
> MSFC with 512MB of RAM.  Is THIS the RAM that the BGP routing table would 
> be used, or is that stored elsewhere?  If elsewhere, then where?
>
> THanks,
>
> Rick Kunkel
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>