[c-nsp] Serial is reset, line protocol is down
Eric Kagan
ekagan at axsne.com
Thu Sep 28 16:10:03 EDT 2006
> We have one router on which we have "Serial is reset, line
> protocol is down" when I do the command show interface. If
> someone can help us, what we have to do resolve the problem.
> When we change the slot it is always the same. We have also
> disconnected cable but no change.
>
>
What type of serial card - a controller ? A part # would help.
If it is a controller - confirm you set the 'speed x' after the
channel-group config.
Eric
More information about the cisco-nsp
mailing list