[c-nsp] Cisco 3030 Catalyst Switch module for dell blade servers

[Pickett, McLean (OCTO)]

Does anybody know how the switch ports map to the on-board NIC's on the 1955
blade servers? Assuming g0/1 is the first nic on the first blade is g0/2 the
first nic on the second blade or the second nic on the first blade?

 

With the CIGESM's on the IBM blade centers you need a second CIGESM to use
the second nic on the blade servers, i.e. g0/2 is the first nic on the
second blade.

 

Thanks,

McLean