[c-nsp] 2960 for video & qos

[Sean Watkins]

In the 2960 configuration library; it says you can use IP access lists
in class-map commands for police/qos etc. Do you know if this is true?

Search for "Classifying Traffic by Using ACLs "


http://www.cisco.com/en/US/products/ps6406/products_configuration_guide_
chapter09186a00805a7699.html


Sean


--
Sean Watkins
North Rock Communications
Phone: 441-540-4102
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Liviu Pislaru
> Sent: Tuesday, April 03, 2007 12:23 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] 2960 for video & qos
> 
> hello,
> 
> 2960 works just fine for LAN QoS. you can mark, classifiy and 
> police, you can adjust maping, buffers and output queues 
> (1p3q3t). if you have voip on your network you can also use 
> "auto-qos"; use 3560 only if you need la L3 device.
> 
> --
> liviu.
> 
> ----- Original Message -----
> From: "Dan" <dan at technc.com>
> Cc: <cisco-nsp at puck.nether.net>
> Sent: Tuesday, April 03, 2007 1:06 AM
> Subject: [c-nsp] 2960 for video & qos
> 
> 
> > Hello,
> > 
> > We are setting up a 6 site video conferencing system and we need to 
> > replace some of our switches and I was wondering if a 2960 
> would do the 
> > job as far as QOS goes?  Or should I go with a 3560?
> > 
> > Dan.
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>