[c-nsp] %LINK-4-ERROR and %CDP-4-DUPLEX_MISMATCH

[Bagosi Rómeó]

Dale!

That's something like!
You have solved my problem:)
I've thinked that must be some solution for this! And you came and solved:)
Thank you very much!


Respect,
Romeo


-----Original Message-----
From: dale.shaw at gmail.com [mailto:dale.shaw at gmail.com] On Behalf Of Dale Shaw
Sent: Wednesday, April 04, 2007 2:21 PM
To: Bagosi Rómeó
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] %LINK-4-ERROR and %CDP-4-DUPLEX_MISMATCH

Romeo,

On 4/4/07, Bagosi Rómeó <Romeo.Bagosi at integris.hu> wrote:
> The link doesn't helped:(
>
> Does these errors affect the network performance?

Yes.

Christian already mentioned it, but have you tried:

int gi0/21
 media-type sfp

Then try changing the speed and duplex (to 100-full):

 speed 100
 duplex full

The Cat2960 config guide[1] says:

"When you change the interface type, the speed and duplex
configurations are removed. The switch configures both types to
autonegotiate speed and duplex (the default). If you configure
auto-select, you cannot configure the speed and duplex interface
configuration commands."

100BASE-FX interfaces support only 100Mbps and do not support auto-neg.

cheers,
Dale

[1] http://www.cisco.com/en/US/products/ps6406/products_configuration_guide_chapter09186a00805a7602.html#wp1028308