[c-nsp] access lists on vlan interfaces

[liviu.pislaru at gmail.com]

hi,

think of a router as a circle with you inside (center of that circle) :).
inbound traffic is the traffic that come towards YOU through interface/SVI you 
want to configure ACL (SVI 100) an leaves the router through another 
interface.

outbound traffic is the destined traffic for vlan 100 that leaves the router 
through interface/SVI you want to configure ACL (SVI 100).

as Dale said, when you apply ACL, try forget interface "Vlan100" is virtual.

--
liviu.

On Wednesday 11 April 2007 02:59, Kyle Evans wrote:
> Hello,
>
> I'm wondering what the convention is for an access list on a vlan
> interface.  How do I tell what is inbound and what is outbound?  For
> example, if I have vlan 100 and a vlan interface 100 with ip address
> 192.168.1.1 that serves as a gateway for 192.168.1.0/24, is traffic from
> 192.168.1.0/24 to 192.168.1.1 inbound?  Or is traffic from the rest of
> the world back to 192.168.1.1 inbound?
>
>
> Kyle
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/