[c-nsp] TDM solution on ONS15454

[David Kim]

Thanks for your comments.
Do you have any idea to provide 100 e1 and 12 DS3 in ONS 15454-E?


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Michael K. Smith -
Adhost
Sent: Wednesday, April 11, 2007 2:13 PM
To: David Kim; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] TDM solution on ONS15454

Hello David:

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp- 
> bounces at puck.nether.net] On Behalf Of David Kim
> Sent: Wednesday, April 11, 2007 1:30 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] TDM solution on ONS15454
> 
> Dear All,
> We have cisco two ONS15454-E(SDH) and we'd like to use them for 
> add/drop TDM( T1,E1,DS3) between 4F and 28F.
> In this box , we just have control b'd and 10G cross-connect and 2
> STM64 and
> 4port STM-4 and 12port Ethernet.
> Coould you give me any suggestion how can we provision TDM with these 
> box.
> 

You need the appropriate cards (t-1, DS-3, etc.) and a backplane that has
telco-style connectors.  I know Cisco has chassis backplanes with BNC and
other types of connectors.  With the appropriate card you just build the
circuit from the ingress port to the egress port across the network.

Regards,

Mike

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/