[c-nsp] New hardware choose help needed

[Dmitriy Sirant]

Hi,

We want to buy new hardware and need your help in choose right hardware 
configuration.

First stage:

Cisco 7204VXR
NPE-G1

What we need from it:
1. Terminate about 50-150 VLANs
2. Terminate about 2500-4000 PPPoE users (at 100Mb, not ADSL)
3. Dynamic access lists and rate-limits for PPPoE users via Radius.
4. 2 x 1000Mbit/s ports to clients with full load and 1 x 1000Mbit/s 
port to ISP with load about 500Mbit/s

Second stage:
Need make city wide LAN with possibility give for client 100Mbit/s 
bandwidth between 2 any points. For it want to use at center such hardware:

Catalyst 6509
    WS-C6509-NEB-A  Catalyst 6500 9-slot chassis(NEBS),21RU,no PS,no Fan 
Tray 1
      WS-CAC-6000W  Cat6500 6000W AC Power Supply 1
      FR-C6FW  Catalyst 6000 family IOS Firewall Feature Set 1
      WS-SUP720  Catalyst 6500 / Cisco 7600 Supervisor 720 Fabric MSFC3 
PFC3A 1
      MEM-C6K-CPTFL512M  Catalyst 6500 Sup720/Sup32 Compact Flash Mem 
512MB 1
      CF-ADAPTER-SP  SP adapter with compact flash for SUP720 1
      GLC-T  1000BASE-T SFP 1
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      WS-X6708-10G-3CXL  C6K 8 port 10 Gigabit Ethernet module with 
DFC3CXL (req. X2) 1
      X2-10GB-ER  10GBASE-ER X2 Module 8
      FAN-MOD-09  Fan Module for CISCO7609 and Catalyst WS-C6509-NEB-A 1
      SM3AEK9-12218SXF  Cisco CAT6000-MSFC3 IOS ADVANCED ENTERPRISE 
SERVICES SSH 1

What we need from it:
1. Guaranteed bus speed for work 60-64 10Gb ports with full load.
2. Terminate about 100-400 VLANs
3. Terminate about 5000-8000 PPPoE sessions (at 100Mb, not ADSL)
4. PPPoE users must authorize via RADIUS
5. NetFlow
6. PPPoE access lists and rate-limits via RADIUS
7. Access list on every interfaces


What you say about hardware we choose ? Is it suitable for that work ?

Thank you