[c-nsp] Bonding

[Tom Sands]

You should be able to use any switch that supports etherchannel via LACP 
(which is just about any Cisco switch).  The commands will depend on 
what switch you are going to go with.


------------------------------------------------------
Tom Sands			  				
Chief Network Engineer				
Rackspace Managed Hosting	    	
(210)447-4391		   	
------------------------------------------------------

Eusebio López wrote:
> Hi,
> 
> I want to make bonding between linux and switch. 
> 
> I need that switch is Cisco? 
> 
> That commands I must use? 
> 
> Could use switch allied telesyn? 
> 
> Cheers
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


Confidentiality Notice: This e-mail message (including any attached or
embedded documents) is intended for the exclusive and confidential use of the
individual or entity to which this message is addressed, and unless otherwise
expressly indicated, is confidential and privileged information of Rackspace
Managed Hosting. Any dissemination, distribution or copying of the enclosed
material is prohibited. If you receive this transmission in error, please
notify us immediately by e-mail at abuse at rackspace.com, and delete the
original message. Your cooperation is appreciated.