[c-nsp] 7200 / NPE-G2

Arie,

Aggregation of frame and leased lines, some dot1q, and EIGRP for a
routing protocol.

For hardware I'd fill them with  PA-2T3+ and PA-MC-2T3+ adapters.


On 4/17/07, Arie Vayner (avayner) <avayner at cisco.com> wrote:
> Can you give a bit more info what you are planning to use the 7200
> router for?
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Sent: Tuesday, April 17, 2007 17:27 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 7200 / NPE-G2
>
> Does anyone have experience/feedback that they're willing to share on
> the moderately new G2 engine ?  I suspect that software is more of a
> wild card than the hardware itself.  Does anyone have an opinion on
> whether one is better off with 12.4.11T or 12.2SB ?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>