[c-nsp] Bonding

[R.L. Nevot]

The switch is depending on the bonding type you want. If you are looking for
active/passive, you may use any switch. If you want to aggregate bandwidth,
incoming and outgoing, the switch may have some requisited and some extra
config.

You may want to take a look to
http://coffeenix.net/data_repository/txt/bonding.txt

Regards

On 4/18/07, Paolo Riviello www.paoloriviello.com <pao_rivi at hotmail.com>
wrote:
>
> Hi,
> are you ascking for
> switch command or linux command????
>
> Anyway you can use almost all kind of switch
>
> cheers
>
> --
>
> Paolo Riviello
>
> http://www.paoloriviello.com
> E-mail: paolo at paoloriviello.com
> E-mail & msn: pao_rivi at hotmail.com
> Skype: pao_rivi
>
> If men could get pregnant, abortion would be a sacrament. -H-
>
>
>
>
>
> >From: Eusebio López <eusebio at palmanet.net>
> >To: <cisco-nsp at puck.nether.net>
> >Subject: [c-nsp] Bonding
> >Date: Tue, 17 Apr 2007 13:34:01 +0200
> >
> >Hi,
> >
> >I want to make bonding between linux and switch.
> >
> >I need that switch is Cisco?
> >
> >That commands I must use?
> >
> >Could use switch allied telesyn?
> >
> >Cheers
> >
> >
> >
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _________________________________________________________________
> Hotmail 1 GB: ancora più spazio per i tuoi messaggi e foto! GRATIS!
> http://specials.it.msn.com/hotmail.aspx
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>