[c-nsp] Catalyst 6500 Active and Standby Supervisor Engine

Collins, Richard (SNL US) rich.collins at siemens.com
Thu Apr 26 13:24:08 EDT 2007


On our 7600 I could run this manual command:

SUP720#redundancy force-switchover

I'm not sure about a permanent startup configuration.

-Rich

>Message: 1
>Date: Thu, 26 Apr 2007 14:26:26 +0800
>From: "Affandi Indraji" <affandi.indraji at gmail.com>
>Subject: [c-nsp] Catalyst 6500 Active and Standby Supervisor Engine
>To: cisco-nsp at puck.nether.net
>Message-ID:
>       <a46f72630704252326v35899bb5uaec2156b01532f3e at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Hi,
>
>Is there any way that i can force to set slot 5 as the primary
supervisor
>engine? the reason i ask this is because i have non-deterministic
behaviour
>when i boot up the switch. Sometimes slot 6 become the primary, some
other
>time, slot 5 become the primary.
>
>Btw, I use Sup 720-3BXL with IOS 12-2.18. Thank you.
>
>Regards,
>Affandi
>



More information about the cisco-nsp mailing list