[c-nsp] bgp and update-source

[Peter Nyamukusa]

Hi

It would take the physical IP but also remember it would take the primary IP
address on the interface just incase you have any secondary IPs

Peter
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Gernot Nusshall
Sent: Monday, April 30, 2007 4:09 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] bgp and update-source

hi to all,


I´ve got an theoretical question.....if i would have configured on 
FastEthernet 0/0 a standby
ip and in the bgp routing process:

neighbor xxx.xxx.xxx.xxx update-source FastEthernet0/0

Would bgp take the stanby ip or the physical ip of the interface?


regards,


Gernot

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/