[c-nsp] Cisco 6500 SUP2/MSFC2 protection and rate-limiting

[Hank Nussbacher]

At 08:45 PM 11-08-07 +0200, Nicolas DEFFAYET wrote:

Although not specific for SUP2, start here and search for "Engine 2" in the 
text:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd802ca5d6.shtml

-Hank

>Hi,
>
>I'm currently work for better protect our devices.
>
>I would like to rate-limit the traffic to MSFC and the traffic
>soft-switched (including IPv6 traffic) for don't kill the route-engine.
>
>How i can do that on a SUP2/MSFC2 running SXF10 ?
>
>I know how do that on a SUP720 with Control Plane Policing but this is
>not supported on SUP2/MSFC2.
>
>Any tips are welcome.
>
>Thank you
>
>Best Regards,
>
>--
>Nicolas DEFFAYET
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/