[c-nsp] 5350XM Config

[Oliver Boehmer (oboehmer)]

Paul Stewart <> wrote on Tuesday, August 14, 2007 4:36 PM:

> Hey folks.... I'm puzzled why this configuration isn't working and
> looking for a 'second set of eyes'...;)
> 
> Incoming T1 is 24X56K and the modems are answering but cannot
> authenticate... something is missing but not sure what it is...
> 
> Any help appreciated... relevant parts below...
> 
 
> aaa authentication login default group tacacs+ enable
> aaa authentication ppp Nexicom group Nexicom
> aaa authorization network Nexicom group Nexicom
[...]
> !
> interface Group-Async0
>  ip unnumbered Loopback0
>  encapsulation ppp
>  no ip mroute-cache
>  async mode dedicated
>  peer default ip address pool pool_dialup
>  ppp authentication pap callin
>  group-range 1/00 1/107
> !

for modem calls, authentication and authorization settings are specified
on the group-async interface, the Dialer configuration is not used. 
So you're missing a 

 ppp authentication pap callin Nexicom
 ppp authorization Nexicom

on your Group-async0 interface in order to perform Radius authen/author.
You could also just configure

aaa authen ppp default group Nexicom
aaa author network default group Nexicom

then you don't need to specify the named methods on the interface(s)..

If this doesn't work, please enable "debug ppp authentication" and check
what's happening. You should at least see ppp starting..

	oli