[c-nsp] MAC authentication bypass (mac-auth-bypass) on 2950s

[Tom Zingale (tomz)]

> I'm wondering whether this info was included in the 2950 docs
> in error - should be replaced with a "why you should really
> upgrade to 2960s" section? :-)

2950 does not support Mac-Auth-Bypass
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst2950/softwa
re/release/12.1_22ea/SCG/sw8021x.html


2960
http://www.cisco.com/en/US/partner/products/ps6406/products_configuratio
n_guide_chapter09186a0080892a41.html#wp1196845


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Martin Hamilton
> Sent: Tuesday, August 21, 2007 1:53 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] MAC authentication bypass (mac-auth-bypass) on
2950s
> 
> On Mon, Aug 20, 2007 at 12:55:03PM -0400, Mike Johnson wrote:
> 
> | Did you enable dot1x globally and assign the interface to access
mode
> first?
> | Otherwise the dot1q commands will not show up. Also, there should
> | be no voice configuration on the port as well.
> 
> Have you got mac-auth-bypass on your 2950s?  I've got the
> per-interface dot1x commands, but no "dot1x mac-auth-bypass".
> 
> I'm wondering whether this info was included in the 2950 docs
> in error - should be replaced with a "why you should really
> upgrade to 2960s" section? :-)
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/