[c-nsp] Annex-M 877

[Tom Storey]

Yes, replace it with a -M model. Its the only way.

Cheers,
Tom

> Thanx.....
> 
> Any possible upgrade to -M for 877... doubt it, but worth asking.
> 
> ..Skeeve
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brett Looney
> Sent: Thursday, 23 August 2007 9:53 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Annex-M 877
> 
> > Does anyone know if the 877 which supports Annex-M (3mb upstream on
> > ADSL2+) is a software upgrade or a hardware specific device.
> 
> Definitely hardware specific - cannot be done with a software upgrade.
> 
> Part numbers for Oz:
> 
> 	CISCO877-M-K9
> 	CISCO877W-G-E-M-K9
> 	CISCO1801-M/K9
> 
> I know there is supposed to be a HWIC but it hasn't shown up as being
> orderable in Australia yet.
> 
> B.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/