[c-nsp] VXR skips 12.2(31)SB6

[roy]

Hi List,

Has anyone ever run into this same scenario where a VXR would skip
booting on 12.2(31)SB6 specified on startup config and would instead
boot into JK9S-M 12.4? conf-reg set at 0x2102; valid images on disk.

Hardware:
7206VXR / NPE-G1 / 1GB DRAM

PA's:
PA-8T-V35=
PA-2FE-TX
PA-A3-OC3SMI=

Boot:
boot system flash c7200-p-mz.122-31.SB6.bin
boot system flash c7200-jk9s-mz.124-1.bin

#sh bootvar 
BOOT variable = c7200-p-mz.122-31.SB6.bin,1;c7200-jk9s-mz.124-1.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102


Or, I may just be missing something here?

Thanks,

Roy