[c-nsp] Routing Across Site-to-Site VPN Tunnel for VPN Client Users?

[Michael K. Smith - Adhost]

Hello All:

I have successfully established a site-to-site tunnel between two ASA
5505's and the connectivity between subnets works perfectly.  I have
users logging into one of the ASA's using the Cisco VPN Client and they
receive an IP address of the local inside subnet.  So far, they have not
been able to get to the devices on the other side of the site-to-site
tunnel when connected.  Is there any magic to this or is it even
possible.  At this point, there are no specific routes on either device,
save for the default route to the outside.

Info:

Site A:
192.168.11.0/24
VPN Pool: 192.168.11.224 - 254
no-nat Access list includes the entire /24

Site B: 192.168.12.0/24

I'm trying to get from 192.168.11.224 to 192.168.12.x

Regards,

Mike
--
Michael K. Smith 
Adhost Internet LLC
mksmith at adhost.com
w: +1 (206) 404-9500 f: +1 (206) 404-9050
PGP: B49A DDF5 8611 27F3  08B9 84BB E61E 38C0 (Key ID: 0x9A96777D)