[c-nsp] TFTP server for LWAPP to Autonomous downgrade
Edward Iong
edward_iong_ at hotmail.com
Wed Aug 29 10:22:55 EDT 2007
Hi,
I have read your question today. Have you found out the solution?
as you set the tftp server machine to 10.0.0.2, make sure your firewall not
blocking the data transfer, use direct cable and in the tftp server
settings- make sure will allow sending files out. Better to turn the
firewall off, make sure your flash have enough space for it, better to
remove the previous IOS. After all that, in the access point side- ap:
typre "copy tftp://10.0.0.2/filename flash:filename", then press enter.
make sure your flash have enough space for it, better to remove the previous
IOS
Hope this will help you.
Regards
Edward
_________________________________________________________________
Booking a flight? Know when to buy with airfare predictions on MSN Travel.
http://travel.msn.com/Articles/aboutfarecast.aspx&ocid=T001MSN25A07001
More information about the cisco-nsp
mailing list