[c-nsp] %CDP-4-DUPLEX_MISMATCH - But they aren't connected!

[Tuc at T-B-O-H.NET]

> 
> Tuc at T-B-O-H.NET wrote:
> 
> > 	I'm not sure I explained myself correctly......(And I don't
> > understand what your trying to accomplish above)
> > 
> > 	The setup looks like this :
> > 
> > TRANSIT1                  TRANSIT2
> >    |                         |
> >    |-E0/0                    |-E1/0
> >    |                         |
> > -------------------------------------
> >               3640
> > -------------------------------------
> >    |                         |
> >    |-E0/1                    |-E1/1
> >    |--------BVI1-------------|
> >    |                         |
> >    |-FA0/24                  |-FA0/24
> > ----------                ------------
> > 2924-1                      2924-2
> > ---------                 ------------
> >   |-FA0/15
> >   |
> >   |-Netgear Ethernet Over Power Extender
> > 
> > 	So its complaining that FA0/15 on 2924-1 is mismatched
> > to E0/0 on the 3640. Well, DUH, no fooling. I would think 
> > the only things it cares about are 3640~E0/1&2924-1~FA0/24
> > and 3640~E1/1&2924-2~FA0/24 since those are the only 2 places
> > that the Ciscos directly connect. 
> 
> What is on the other end of the Netgear Ethernet Over Power Extender on 
> Fa0/15 on 2924-1?
>
	The other end is a NetGear Ethernet Over Power Router
(WGX102, part of the WGXB102 kit)
>
> Which device is complaining?  2924-1, the 3640, or both?
> 
	3640.......

			Thanks, Tuc