[c-nsp] ATM Interface (range pvc feature)

[Kameron Gasso]

Masood Ahmad Shah wrote:
> I'm configuring C3660 for PPPoE subscribers. I'm just trying to use feature
> "range [range-name] pvc start-vpi/start-vci end-vpi/end-vci" under ATM
> interface configurations. 
> 
> Router(config)#interface atM 1/0.4 multipoint 
> Router(config-subif)# Here I can't find "range" command. 
> Router(config-subif)# 
> 
> I tried different IOS version 12.2 and 12.3, but it did not help. I'm
> running now with c3660-telcoentk9-mz.123-22.bin. It would be nice, If
> someone can confirm the support of range command under ATM interface in 3600
> series routers.

If I remember correctly, the 3660 is not considered a broadband/DSL
aggregation router and doesn't support the range command.  We're using
PVC ranges successfully on 7206VXRs, but on our 7100s we have to
manually configure each PVC.

http://www.cisco.com/en/US/netsol/ns568/networking_solutions_solution.html
might have some further useful info. :)

-- 
Kameron Gasso | Senior Systems Administrator | visp.net
Direct: 541-955-6903 | Fax: 541-471-0821