[c-nsp] Ethernet over Coax

[jp]

If you've got two coaxes, you could do a DS3 over it.

On Tue, Dec 04, 2007 at 08:14:47PM +0200, Arie Vayner wrote:
> You might want to get a CMTS and some cable modems and run DOCSIS...
> 
> Arie
> 
> On Dec 4, 2007 4:07 AM, Dracul <chris.garzon at gmail.com> wrote:
> 
> > Hi Guys,
> >
> > I'm reviewing cabling solutions. Has anyone tried the ethernet over coax?
> > Has it improved over the years (they claim to reach 100Mbs)? especially
> > with
> > using Cisco? splitters are still
> > going to be used and I assume there's no Switch 2900,3700 series that
> > cisco
> > can support for these kind of cabling. I was looking into the cables for
> > evaluation to use in Video on Demand solutions. Hope anyone can shed light
> > on the pros and cons for ethernet over coax.
> >
> > regards,
> > chris
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
/*
Jason Philbrook   |   Midcoast Internet Solutions - Wireless and DSL
    KB1IOJ        |   Broadband Internet Access, Dialup, and Hosting 
 http://f64.nu/   |   for Midcoast Maine    http://www.midcoast.com/
*/