[c-nsp] Native VLAN mismatches between 2924/2950

[Pierre Lamy]

Sorry I meant to say the 4mb 2924XL doesn't support dot1q

Pierre Lamy wrote:
> Turns out was because (as far as I can tell) the 2950 only supports 
> dot1q and the 2924XL only supports ISL. Go figure
>
> Pierre
>
> Pierre Lamy wrote:
>   
>> I'm getting a lot of Native VLAN mismatches between my 2950 and 2924s. 
>> This is due to the case difference on the 2 platforms, between VLAN1 and 
>> Vlan1.
>>
>> Is there any way to (1) fix the error or (2) suppress the CDP error messages
>>
>> Nov 30 14:54:27 192.168.0.113 26469: %CDP-4-NATIVE_VLAN_MISMATCH: Native 
>> VLAN mismatch discovered on FastEthernet0/15 (0), with SW1 
>> FastEthernet0/18 (1).
>>
>> The documentation and a google search indicate that simply changing the 
>> name doesn't work; changing the conf file, uploading via tftp didn't 
>> work either. And you can't simply delete/recreate the Vlan1.
>>
>> Regards,
>>
>> Pierre Lamy
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>   
>>     
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>