[c-nsp] NM-16ESW Problem

[Paul Stewart]

I'm confused... there is no GigE ports on these cards .. the link you sent
refers to much older hardware - is there something I still need to do on
newer hardware to "stack" them together?

Thanks very much,

Paul


-----Original Message-----
From: Łukasz Bromirski [mailto:lukasz at bromirski.net] 
Sent: Tuesday, December 11, 2007 9:01 AM
To: Paul Stewart
Cc: 'cisco-nsp'
Subject: Re: [c-nsp] NM-16ESW Problem

Paul Stewart wrote:
> Hi folks..
> 
> Having a problem passing layer3 traffic via SVI on a NM-16ESW module and
> stumped ;)
> 
> Cisco 3825 router with (2) NM-16ESW modules:

Remember You need to "stack" etherswitch modules together if they're
installed in one chassis. If You don't do this - various things will
happen:

"Q. How do you connect two EtherSwitch modules in the same chassis?"
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_qanda_item091
86a00802c9e7a.shtml#qa1

-- 
"Don't expect me to cry for all the     |               Łukasz Bromirski
  reasons you had to die" -- Kurt Cobain |    http://lukasz.bromirski.net

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.17.0/1180 - Release Date: 12/10/2007
2:51 PM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.17.0/1180 - Release Date: 12/10/2007
2:51 PM