[c-nsp] default route behavoir

[Pshem Kowalczyk]

{cut}\

> To avoid recursive routing, use the interface parameter of the route
> command, along with the next hop ip address.
>
> ip route 0.0.0.0 0.0.0.0 vlan1 10.50.6.2 10
> ip route 0.0.0.0 0.0.0.0 vlan2 10.50.5.24 20

Just be aware, that if you do it this way the vlan stays up as long as
any of the interfaces can pass that vlan, not necessarily the
interface you want to track.

regards
pshem