[c-nsp] Dialin problems

[Aaron R]

Hi Adrian, 

This would account for the communication failure. I will check my
configuration when I am next at work. If not its time to get the packet
sniffers out :)

Thanks!

Aaron. 

-----Original Message-----
From: Adrian Chadd [mailto:adrian at creative.net.au] 
Sent: Sunday, December 16, 2007 3:50 PM
To: Aaron R
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Dialin problems

On Sun, Dec 16, 2007, Aaron R wrote:
> Hi Guys,
> 
> I am having some trouble with a dial solution that I am hoping someone can
> help me with. My current setup involves a dialup pstn modem on the aux
port
> for the purpose of remote access. I am using ip unnumbered on the dialer
> interface so that it will borrow the IP of my inside fastethernet address
on
> the router. I can dial in fine and I receive an IP address in the same
> subnet as the FA0/0 interface but I am only ever able to communicate with
> the gateway not any other devices on the inside subnet. 

Have you disabled proxy-arp on that ethernet interface? In this
configuration
you'll have to enable it.



Adrian