[c-nsp] RSP redundancy with SSO?

[Andy Dills]

On Tue, 18 Dec 2007, neal rauhauser wrote:

>  Can anyone comment on RSP redundancy with SSO mode?
> 
>  I have a test 7507 with rsp-k4pv-mz.120-32.S8.bin on both RSP2s. I've done
> this:
> 
> service single-slot-reload-enable
> 
> 
> redundancy
>  no keepalive-enable
>  mode sso
> 
>   And it doesn't seem to ever sync the slave

Try adding:

hw-module slot 2 image slot0:/rsp-k4pv-mz.120-32.S8.bin
hw-module slot 3 image slot0:/rsp-k4pv-mz.120-32.S8.bin
slave auto-sync config 

And then (make sure to wr mem first):

hw-module standby-cpu reset

> Peer (slot: 3) information is not available because it is in 'DISABLED'
> state

Sounds like the slave RSP didn't boot, I'm guessing because of one of the 
above. Make sure the image exists in both slot0 and slaveslot0.

Andy

---
Andy Dills
Xecunet, Inc.
www.xecu.net
301-682-9972
---