[c-nsp] Cisco Rate Limit

[Gert Doering]

Hi,

On Thu, Dec 20, 2007 at 09:04:13AM -0600, Duracom Lists wrote:
> I have the need to limit a customer to 20M Up and 20M Down.  The scenario is
> they are connected to our OC3 ATM via a 45M DS3 but only paying for 20M, so
> can you rate limit the entire interface that they are on without doing an
> Access list to match IP's since they have several IP's from different Class
> C's?  If so can you give me an example of the command?

If you have them on ATM, why not use the ATM facilities for rate-limting?

>  ip address x.x.x.x 255.255.255.252
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  no ip mroute-cache
>  pvc 4/409 
>   vbr-nrt 40000 40000 1

... don't permit them to use 40 Mbit here, and then rate-limit on IP
layer to 20 Mbit...

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 304 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20071224/241e3e35/attachment.bin