[c-nsp] How to max out T1's on 2851

[Dean Perrine]

What is the best configuration to group these though,

I see stuff with cisco on there using channel-group, then other posts
talking about using ppp multilink to group lines.

What do you think?


On 2/1/07, Joe Maimon <jmaimon at ttec.com> wrote:
>
>
>
> Tuc at T-B-O-H.NET wrote:
>
> > Hi,
> >
> >       For a friend I'm posting this.
> >
> >       He was told by Qwest that if he bought a 2851 that he'd be
> > able to put 8 T1's on it. I was shown by a salesperson that 6 was
> > considered the max. But the question still remained, does anyone
> > know the modules necessary to put 8 T1's (Or even 6) onto a 2851?
> >
>
> 4 WIC-2T or VWIC-2MFT-T1
>
> I dont think you would have any problem line rating them even with small
> packets with no features (nat, firwalling, ipsec, ssl vpn, ids, policy
> routing etc...) turned on.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/