[c-nsp] Cisco RPS

[Ian MacKinnon]

matthew zeier wrote:
> 
>>>
>> Is it just me, or are the redundant power options totally confusing?
>> This is for a data centre, every rack has 2 AC feeds, from separate
>> sources/ups etc.
>> All I need is for everything to stay working if I lose one supply.
>> How much is a 675? I need to support a number of switches, the 600 would
>> support 4 devices at the same time.
>>
>> Any other suggestions?
> 
> I ran into the same problem - take a look at APC's 1u ATS.  I deemed it
> less likely to lose a power supply than a circuit (or at least that was
> the risk that we were willing to take).

Ah, that's a good idea, we already use the APC pdu's.
thanks
-- 

This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed.  
If you have received this email in error please notify the sender. Any 
offers or quotation of service are subject to formal specification.  
Errors and omissions excepted.  Please note that any views or opinions 
presented in this email are solely those of the author and do not 
necessarily represent those of Lumison, nplusone or lightershade ltd.  
Finally, the recipient should check this email and any attachments for the 
presence of viruses.  Lumison, nplusone and lightershade ltd accepts no 
liability for any damage caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by Lumison.